7 YEAR 450,000 KM Green Coolant is a GENUINE GLYSANTIN G48, Original Equipment Manufacturer (OEM), Fully Licensed and Warranty Approved, Type "A" Ethylene glycol, Anti-Freeze Anti-Boil as used in initial manufacturer factory fills. It uses a technically advanced HYBRID (HOAT - Hybrid Organic Acid Technology) based inhibitor system that is Phosphate, Amine and Nitrite free. The extended long life inhibitor formulation prevents rust, corrosion, cavitation and degradation of the cooling system. It is available in both concentrate and premix formulations.
7 YEAR 450,000KM GREEN CONCENTRATE Replaces 4 YEAR LONG DRAIN AFAB CONCENTRATE. 7 YEAR 450,000KM GREEN COOLANT can be safely mixed with older Penrite 4 YEAR LONG DRAIN AFAB.
7 YEAR 450,000 KM Green Coolant is suitable for the cooling systems of petrol, LPG, light and heavy duty diesel and industrial engines where Hybrid (HOAT) type anti-freeze / anti-boil and anti-corrosion properties are required.
7 YEAR 450,000 KM Green Coolant is suitable for passenger cars, 4WD's, motorcycles, light & heavy duty commercial vehicles, construction and agricultural equipment. It is especially suited to vehicles of European origin such as Audi / VW (G11), BMW, Mercedes, Porsche (Pre-1995), Volvo, Opel & Saab, but it may be used in all types of vehicles.
7 YEAR 450,000 KM Green Coolantprovides long-term protection against rust and corrosion for all materials used in the engine and in the cooling system construction. It protects cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics used for the cooling system construction. It is effective in all cast iron aluminium engines that are under load or used in extreme hot and cold climates.
7 YEAR 450,000 KM Green Coolant may be used in all types of vehicles that use green, blue or yellow coloured initial fill coolants and it is also suitable for use in out of warranty service to maintain OEM performance. It is also ideal for motorcycles.
7 YEAR 450,000 KM Green Coolant should be used at a concentration level of 50%. We recommend using de-mineralised water when mixing although the phosphate free formulation allows it to be mixed with normal tap water if necessary.
For measuring coolant coolant concentration and condition, we recommend Penrite Coolant Test Strips. Penrite recommend flushing the cooling system prior to a complete service refill. Penrite Radiator Flush effectively cleans the system in 7 minutes and prepares the cooling system for new coolant.
Penrite recommend mixing at the manufacturers recommended concentration levels.
When mixing coolants, Penrite recommend mixing at the manufacturers recommended concentration levels with Penrite De-Mineralised Water
For product safety and handling information, refer to Safety Data Sheet (SDS SHEET) below