HPR 0 is a premium, full synthetic, SAE 0W-30 engine oil. It contains a DOUBLE LAYER of engine wear protection with FULL ZINC and Penrite's advanced EXTRA TEN technology.
HPR 0 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged engines and is suitable for use in passenger cars, 4WD's and light duty commercial vehicles.
HPR 0 exceeds the requirements of API SL/CF, ACEA A3/B4 as well as many manufacturers' specifications. It can be used where the ILSAC GF-3/GF-4, ACEA A1/B1 and A5/B5 fuel economy specifications are specified by the manufacturer. It is suitable for vehicles that specify the use of SAE 0W-30, SAE 5W-20 or 0W-20 low viscosity engine oils as specified in the owner's handbook.
HPR 0 is suitable for passenger cars, 4WD's and light duty commercial vehciles and can be used in petrol, LPG and light duty diesel engines. It is also suitable for use in Hybrid powered petrol/electric vehicles where this viscosity and specification are requested by the manufacturer. It is NOT suitable for use in diesels fitted with a DPF (Diesel Particulate Filter) that require an ACEA “C” grade Low-SAPS (Sulphated Ash, Phosphorus & Sulphur) engine oil or in four stroke motorcycles with wet clutches.
HPR 0 features the Penrite EXTRA TEN in the oil's SAE rating. This technology helps protect your engine by using a normal start up viscosity with an oil that has a higher operating temperature viscosity. This improves engine oil film strength, lowering frictional heat whilst providing an extra layer of anti wear protection over standard SAE grade oils, reducing engine wear in all driving conditions.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
HPR 0 passes all engine test performance requirements of API SN and SM but although using the same base chemistry, cannot claim API SM or SN due to the full zinc content.
For product safety and handling information, refer to Safety Data Sheet (SDS SHEET) below
|Density at 15°C, kg/L||0.854|
|Viscosity, Kinematic, cSt at 40°C||64|
|Viscosity, Kinematic, cSt at 100°C||11.4|
|Cold Cranking Viscosity, cP at -35°C||5765|
|Zinc, Mass %||0.105|
|Phosphorus, Mass %||0.096|
|Sulphated Ash, mass %||1.09|