Synfleet 50 is a premium fully synthetic, warranty approved, heavy duty gear oil for transmissions in severe duty applications. It is manufactured using an advanced additive system and a combination of synthetic base fluids to provide extended drain life and improve equipment life.
Synfleet 50 is approved and listed by EATON against specification PS-164 Rev 7 & Mack TO-A Plus
Synfleet 50 is designed for use in heavy duty transmissions in on and off highway applications. It is particularly suitable for use in Eaton (Road Ranger), Volvo, Mack, Spicer and many other transmissions operating in severe service conditions that require a SAE 50 lubricant. It can also be used in track roller, reduction hubs and industrial transmissions that specify SAE 50 oils.
Synfleet 50 can be used in standard transmissions 6, 7 and 8 speed transmissions that required a non EP lubricant that receive severe duty use and require extended drain periods.
Synfleet 50 meets or exceeds the Eaton Fuller requirements for 800,000 kilometre* oil drain intervals in the following transmissions.
It also meets the 1,600,000km* oil drain requirements for Eaton transmissions.
* Contact Eaton for details on extended warranty drain intervals in Australia as conditions apply dependent on the operation of the vehicle. Typically 400,000km is used.
For product safety and handling information, refer to Safety Data Sheet (SDS SHEET) below
|Density at 15°C, kg/L||0.860|
|Viscosity, Kinematic, cSt at 40°C||132|
|Viscosity, Kinematic, cSt at 100°C||17.5|
|Viscosity, Brookfield, cSt @ -40°||104,000|