ENVIRO+ C2 is a premium full synthetic, long life, SAE 0W-30 engine oil. It is manufactured using advanced mid SAPS (Sulphated Ash, Phosphorus and Sulphur)* additive technology for ultimate engine protection.
ENVIRO+ C2 meets the requirements of European ACEA C2 and API SP (American Petroleum Institute) as well as many other manufacturer specifications.
Application
ENVIRO+ C2 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged low emission petrol and diesel engines including Hybrids
ENVIRO+ C2 may be used where SAE 0W-20, SAE 0W-30 and SAE 5W-30 grade oils are specified by the manufacturer. It can be used where ACEA C2 and ACEA A1/B1 (Obsolete) and ACEA A5/B5 is specified and where API SP, API SN Plus, API SN or API SM grade oils are required.
ENVIRO+ C2 is a mid-SAPS engine oil designed for use in petrol and light duty diesel engines including those fitted with emission treatment devices such as Diesel Particulate Filters (DPFs). It can be used in MY2015+ Toyota Hilux, Prado and Land Cruiser diesels and meets the requirements of Ford WSS-M2C950-A for use in Ford diesel engines such as Focus, Mondeo and PXII Ford Ranger. It can also be used in many other makes and models including -
- Toyota Hilux, Prado, Land Cruiser, Fortuner & RAV 4
- Ford Ranger, Everest, Kuga, Mondeo, Focus
- Alfa Romero Giulietta, Mito
- Fiat Panda
- Honda CR-V
- Iveco Daily
- Jaguar F Type, XE, XF, XJ, XK
- Jeep Renegade, Cherokee
- Land Rover Discovery 4, Freelander, Range Rover Sport
- Peugeot 308
- Subaru Forester, Outback
- VW Touareg, T5
ENVIRO+ C2 is suitable for use in passenger cars, 4WD’s & light commercial vehicles. It is not recommended for use in motorcycles. It can be used with Petrol / E10 & Diesel engines with or without a DPF (Diesel Particulate Filter).
NOTE: It is NOT recommended for use in motorcycles with wet clutches.
Important Information when changing oil
When changing oil, Penrite recommends using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
Please Note: A 58mm cap with pouring tap is available to fit 7, 10 & 20 litre packs. https://penriteoil.com.au/products/58mm-plastic-tap
* Low SAPS oils may sometimes be referred to as "Low Ash" oils
**Fuel economy improvement of >2.9% compared to reference oil in the M111FE engine test
My Garage (0 Vehicle)
Download Chrome
Download Firefox.
Download Edge
My Garage
KEY
INFORMATION
WHERE TO BUY
